Choosing the ideal location is the first step in developing a real grass putting green. Choose a location in your backyard that gets a lot of sun and has good drainage. Avoid places with poor drainage or shade, as these conditions might cause issues with your turf. Measure the space and mark it with stakes or flags after selecting the ideal spot.
The soil for your putting green must now be prepared. Till the soil to a depth of about six inches after clearing the area of any grass or other vegetation. This will make a good base for your turf and assist to loosen up any compacted soil. Using a rake and a soil leveler, level the soil, and then add a layer of sand to aid in drainage.
Installing the turf is step three. It’s time to put the turf after the soil has been prepared. Turf can be bought already cut, or it can be specially cut to match your location. Make sure to slightly overlap the edges as you spread the turf over the prepared soil. To fit the grass around any obstructions, such as rocks or trees, use a carpet knife.
Step 4: Keep Your Putting Green in Good Condition Once your putting green is installed, it’s crucial to keep it well maintained. Regularly water your lawn, being careful not to overwater as this might cause mold or fungus issues. Apply a fertilizer made specifically for putting greens, and keep the turf mowed to a height of about 3/8 inch.
Making a Golf Hole in Your Garden
You need a golf hole to finish the setup once you have your putting green. Start by digging a hole that is just a little bit bigger than the size of a cup to create a golf hole in your garden. Make sure the cup can be held securely by the hole being deep enough. Place the cup in the hole and cover it with soil, pushing it down firmly as you go. You can start practicing your putting after trimming the grass around the cup with a carpet knife.