You might be wondering if Drano can be used to unclog your sink if you have a grease trap in your home or commercial kitchen. No, it is not advised to use Drano in a sink that has a grease trap. Drano is a potent chemical that can harm the environment and ruin your pipes. In addition, grease, the primary cause of clogged sinks in kitchens with grease traps, cannot be broken down by Drano.
Before they enter the sewer system, grease and oil are stopped by a grease trap. Most jurisdictions have laws requiring grease traps to stop clogs and backups in the sewage system. Up to 50 Drainage Fixture Units (DFUs) of wastewater can be handled by a standard grease trap, which has three compartments. A DFU is a unit of measurement used to calculate a plumbing fixture’s flow rate. A sink has one DFU, a toilet has four, and a dishwasher has two DFUs, for instance.
The best technique to unclog a clogged sink in a kitchen with a grease trap is to manually clear the grease and debris from the trap. To accomplish this, remove the trap’s lid and scrape the grease into a container. Because the grease could be hot and contain dangerous microorganisms, it is important to wear gloves and protective gear. After removing the oil, wash the trap with hot water and soap to clean it.
You can clean a residential grease trap by taking off the lid and using a spoon or spatula to remove the grease. To get the grease and water out of the trap, you can alternatively use a tiny pump. After removing the oil, wash the trap with hot water and soap to clean it. To avoid clogs and backups, it is advised to clean your grease trap at least once a month.
A grease trap that is bigger and is made to manage more effluent is called an oil interceptor. In commercial and industrial environments including car washes, industries, and restaurants, oil interceptors are frequently employed. Installed below and connected to the sewage system is an oil interceptor. The interceptor, which stops oil and grease before they enter the sewer system, needs to be cleaned periodically by a qualified expert.
In conclusion, it is not advised to use Drano in a sink that has a grease trap since it could harm the environment and your pipes. Manually clearing the grease and debris from the grease trap is the best approach to unclog a kitchen sink with a grease trap. To avoid blockages and backups, it’s also crucial to frequently clean your grease trap. A bigger amount of wastewater may need the use of an oil interceptor, which should be built and managed by a qualified specialist.
By measuring the amount of grease present inside the trap, you can determine when a grease trap is full. Normally, when the grease level reaches 25% of the total liquid volume or when the trap’s capacity is reached, whichever occurs first, the trap should be emptied. To avoid blockages and backups in the plumbing system, it is advised to have a professional clean and maintain the grease trap on a regular basis.