Picking Tubular Locks without Tools: A Comprehensive Guide

How do you pick a tubular lock without tools?
Read more on www.youtube.com

Circle locks, also referred to as tubular locks, are frequently found in vending machines, coin-operated washers, and other similar appliances. They are harder to pick since they are made to be more secure than conventional locks. However, there are a few techniques you can use if you find yourself in a scenario where you have to pick a tubular lock without tools.

Using a pen or a paperclip is one of the simplest ways to pick a tubular lock without tools. The pen or paperclip must first be straightened before being inserted into the lock. When you get close to the pins, there will be resistance. Until you feel the pins release, gently push and turn the pen or paperclip. You might need to practice a while, but if you’re persistent and patient, you should be able to pick the lock.

A shim formed from a soda can is another technique. A little piece of aluminum that has been cut off the soda can and folded in two. With the folded end facing up, insert the folded shim into the lock. The pins will disengage if you gently press and rotate the shim. This approach can work, but it does require a little more ability and finesse.

In light of this, picking a tubular lock is comparable to picking a round key lock. By placing a pen or paperclip into the keyhole and gradually pressing and rotating it until the pins loosen, you can pick a lock. You might need to practice a little, but if you’re persistent and patient, you should be able to pick the lock.

Make sure the dryer is unplugged before attempting to access the coin box on a Speed Queen dryer if you need to change the coins. Find the coin box on the dryer’s back and take out the screws holding it in place. You can replace the coins as necessary once the coin box has been taken out. Put the coin box back in place and screw it down.

Likewise, there is a similar procedure involved in installing a coin meter. Find the coin meter on the gadget and take out any screws holding it in place first. Screw the coin meter onto the apparatus and connect it. Make sure the coin counter is working properly by testing it.

As a result, opening the coin box is necessary to remove the coins from your Maytag Bravos washer. Initially, confirm that the washer is disconnected. Find the coin box on the washer’s rear and take out the screws holding it in place. You can take the coins out as needed after removing the coin box. Put the coin box back in place and screw it down.

To sum up, picking tubular locks without tools can be difficult, but it is doable if you use the appropriate strategies. Similar techniques can be used to pick circular key locks. On Maytag Bravos washers and Speed Queen dryers, you must reach the coin box and remove any screws holding it in place in order to change the coins. The procedure for installing a coin meter is similar. You should be able to deal with any lock- or coin-related problems that come your way using these tricks and recommendations.

Leave a Comment