As a security mechanism, cylinder locks are frequently used in residences, workplaces, and other organizations. However, there are several circumstances in which opening a cylinder lock without a key may be necessary. Opening a cylinder lock may seem like a difficult operation, whether you need to enter a secured area because you have lost your key or because you need to. But don’t worry; this detailed tutorial will show you how to open a cylinder lock quickly.
It’s crucial to know what kind of lock you’re working with before attempting to unlock a cylinder lock. Single cylinder and double cylinder locks are the two most common varieties. While double cylinder locks need a key to lock or unlock from both sides, single cylinder locks feature a keyhole on one side and a thumbturn on the other.
Step 2: Collect the Required Tools You will need a few tools in order to unlock a cylinder lock. A tension wrench, a lock pick, and a lubricant like WD-40 are among examples. Most hardware stores and internet retailers carry these tools in stock.
The tension wrench should be inserted into the keyhole’s bottom and turned just enough to exert pressure in the direction the key would be turned. With your left hand, secure the tension wrench in position.
Put the lock pick into the top of the keyhole and rake it back and forth while gently pushing up on the lock’s pins. Pushing up on the pins should cause them to “set” into position.
When every pin has been placed, spin the lock with the tension wrench, and it should unlock. Release the tension on the tension wrench a little bit and try again if the lock won’t unlock.
Without a Key: Opening Commercial Master Locks Without a key, a commercial master lock must be opened using a somewhat different strategy. A particular kind of cylinder lock called a pin tumbler lock is used in master locks. To unlock the cylinder, these locks include pins of varied lengths that must be lined up.
You will need a tension wrench, a lock pick, and a padlock shim to open a master lock without a key. A padlock shim is a tiny piece of metal that can be used to get around a padlock’s locking system.
Place the Tension Wrench in the first position. The tension wrench should be inserted into the keyhole’s bottom and turned just enough to exert pressure in the direction the key would be turned. With your left hand, secure the tension wrench in position.
Slide the padlock shim up until it contacts the lock’s pins after inserting it into the keyhole’s bottom. When the shim hits the back of the lock, push it in even farther.
The lock should open if you turn it with the tension wrench. Release the tension on the tension wrench a little bit and try again if the lock won’t unlock.
In conclusion, it takes some ability and the necessary equipment to unlock a cylinder lock or a commercial master lock without a key. However, anyone can learn how to pick a lock with time and effort. It is crucial to remember that lock picking should only be done in dire circumstances or with the owner’s consent. Otherwise, it is deemed illegal and may result in legal troubles.