Without exposure to the sun, many people prefer to use tanning beds to maintain their tan throughout the year. You might be asking how to connect a tanning bed if you’ve just bought one or are planning to install one in your house or clinic. We’ll provide you a step-by-step tutorial to do precisely that in this post.
Finding an appropriate place for the tanning bed is the first step in setting it up. The location of tanning beds should be well-ventilated and far from anything combustible. Additionally, make sure there is adequate room around the bed for simple access and upkeep.
Following the selection of a suitable place for your tanning bed, the power supply must be connected. The majority of tanning beds include a conventional 110V plug that fits into a regular wall outlet. However, a dedicated 220V circuit can be needed for some bigger commercial tanning beds.
UVA and UVB radiation are combined in tanning beds to produce a tan. Typically, either high-pressure or low-pressure bulbs are used in tanning beds. While low-pressure bulbs are less intense and result in a lighter tan, high-pressure bulbs are more intense and give off a darker tan.
Pink bulbs are sometimes used in tanning beds to speed up the tanning process. The red light that is emitted from these bulbs encourages blood flow to the skin, which enhances the efficiency of the tanning bed.
To avoid overexposing people to UV radiation, tanning beds must always be used with a timer. Depending on the user’s skin type and the intensity of the bulbs, the built-in timer in most tanning beds can be adjusted for a variety of lengths.
Most tanning beds do have a weight restriction. Depending on the model and manufacturer, the weight restriction can change, although it usually ranges between 250 and 300 pounds. To make sure you don’t go over the tanning bed’s maximum weight capacity, it’s crucial to verify the weight limit before using it.
The size and power output are the key distinctions between a home tanning bed and a professional tanning bed. Commercial tanning beds can handle more customers and provide a deeper tan in less time because they are bigger and more powerful. Home tanning beds are better ideal for individual usage because they are smaller and less powerful. Due of their larger size and greater power output, commercial tanning beds can frequently cost more than home tanning beds.
Finally, setting up a tanning bed is an easy operation that can be completed with the correct equipment and a little bit of knowledge. You can make sure that your tanning bed is correctly set up and prepared for usage by following the instructions provided in this article. Just keep in mind to use the tanning bed cautiously and responsibly by always adhering to the manufacturer’s directions.
The size and power of a commercial tanning bed versus a home tanning bed are the key differences. Home tanning beds are smaller, less powerful, and intended for sporadic usage, whereas commercial tanning beds are larger, more powerful, and intended for frequent use. In general, commercial tanning beds cost more than home tanning beds.