Backwashing a Commercial Pool: A Step-by-Step Guide

How do you backwash a commercial pool?
Backwashing a sand or DE filter is a simple task. Shut off the pump, set the multiport valve or slide valve handle to the backwash position, roll out the backwash hose and turn the pump on again. Backwash for 3-4 minutes or until the water runs clear, then shut the pump off and return the valve to the filter position.
Read more on blog.intheswim.com

It’s crucial to keep a business pool maintained for the swimmers’ safety and enjoyment. Backwashing, which involves cleaning the filter by reversing the water flow, is one of the crucial chores in pool care. To clear the water of the collected filth and debris, backwashing is required. We’ll go over backwashing a business pool in this article and address some relevant queries. How Should a Commercial Pool Be Backwashed? 1. Disconnect the pool pump: To avoid causing any harm to the system, disconnect the pool pump before beginning the backwashing procedure. Locate the multiport valve on the pool filter system and turn it to the “backwash” position.

2. You might need to manually backwash the pool if your pool filter doesn’t have a multiport valve. 3. Connect the backwash hose: Make sure the backwash hose is long enough to reach the drainage area and connect it to the waste port on the multiport valve. Turn on the pool pump and let it run for two to three minutes, or until the water in the sight glass seems clear.

4. 5. Rinse the filter: After backwashing, switch the multiport valve to the rinse setting and turn off the pump. To rinse the filter, turn on the pump and let it run for 30 seconds. 6. Turn off the pump: Switch the multiport valve to the filter position after turning off the pump. Activate the pump, then resume regular filtration. Is pool maintenance cheaper if you do it yourself? It can be less expensive to clean your own pool than to hire a professional pool cleaner, but it takes time, work, and expertise. The pool needs to be cleaned and maintained regularly, and you must spend money on the appropriate tools, chemicals, and test kits. A pool service, on the other hand, can help you save time and guarantee that your pool is well maintained. The size, location, and frequency of service all affect how much a pool service will cost.

How Much Does a Ground Pool Cost to Drain and Clean?

An inground pool’s size, the amount of dirt and debris in the pool, and its location all affect how much it will cost to drain and clean the pool. The usual price is between $500 to $2,000, but for larger or highly contaminated pools, the price may be higher. To prevent any damage, it’s crucial to employ a professional pool service to drain and clean your pool. How Much Does it Cost to Shock a Pool, Also?

Depending on the size of the pool and the sort of shock therapy, shocking a pool might be expensive. Depending on the size of the pool, you may require several pounds of shock treatment, which costs on average between $15 and $40 each pound. In order to maintain the chlorine levels and stop algae growth, it is advised to shock the pool at least once every week.

Is a pool route a profitable venture?

For people who prefer working outside and have pool care knowledge, a pool route can be a successful company. The income is based on the quantity of customers and the frequency of service, and the business entails servicing and maintaining pools for frequent customers. However, setting up a pool route business needs a large investment in supplies and equipment, and it might take some time to attract customers. To run a pool route business, you must be properly licensed and insured.

Leave a Comment