The size of your pool, the kind of filtration system you have, and the climate in your area are just a few examples of the variables that may affect your response. For the majority of pools, 8–12 hours per day of pool pump operation is sufficient. The pump may need to run for longer periods of time in hot areas or for larger pools.
Running your pool pump continuously can offer some advantages, such as maintaining crystal-clear water and limiting the spread of algae. However, it may also result in increased energy consumption and pump wear and tear. Furthermore, excessive filtering might lower the water’s amount of chlorine, which can promote the growth of bacteria.
So how frequently should your pool be backwashed? Backwashing is the process of cleaning the filter by turning the water’s direction as it is passing through. This must be done on a regular basis to make sure your filtration system is operating properly. However, backwashing too frequently might waste water and lessen the filtration system’s efficiency.
You should backwash your pool, as a general guideline, when the pressure gauge on your filter shows an increase in pressure of 8–10 psi over the normal operating pressure. For the majority of pools, this normally happens every 4-6 weeks, although it can change based on things like how often people use the pool and how much debris is in the water.
In conclusion, running the pool pump continuously might result in greater energy expenditures and lower chlorine levels and is not usually essential for most pools. Longer pump run periods could be required in warmer areas or for larger pools. Backwashing should be done sometimes but not too frequently, usually every 4-6 weeks or when the pressure gauge shows an increase in pressure of 8–10 psi. You can keep your pool clean and well-maintained while reducing energy expenditures and water waste by adhering to these recommendations.