Some of the most stunning and important tricks in skateboarding are grinds. They are distinguished by the trucks of the skateboard sliding or grinding against a surface, like a rail or ledge. Every grind has a unique approach, look, and degree of difficulty. The 50/50 grind, Smith grind, Bs bluntslide, and crooked grind are four of the most common skateboard grinds that will be covered in this article.
One of the most fundamental and simple skateboard grinds is the 50/50. It entails grinding perpendicular to the obstruction with the board while using both trucks on a surface like a rail or ledge. When the barrier is in reach, the rider ollies onto it and lands with both trucks on the rail or ledge. The rider then proceeds to slide along the obstacle while being supported by the two trucks, ollieing off at the end.
A more sophisticated skateboard grind than the 50/50 is the Smith grind. It entails grinding with the rear truck at an angle to the obstruction on a surface, like a rail or ledge. In order to get the back truck to grind on the obstruction, the rider approaches the obstacle, ollies onto it, and then rotates the board 90 degrees. The rider then proceeds to slide along the obstacle while supported by the back truck, ollieing off at the conclusion.
Another skilled skateboard grind is the Bs bluntslide, commonly referred to as the backside bluntslide. It entails grinding with the rear truck at an angle to the obstruction on a surface, like a rail or ledge. In order to get the back truck to grind on the obstacle, the rider approaches the obstruction, ollies onto it, and then rotates the board 270 degrees. The rider then proceeds to slide along the obstacle while supported by the back truck, ollieing off at the conclusion.
A fashionable and difficult skateboard grind is the crooked grind. It entails grinding with the front truck at an angle to the obstruction on a surface like a rail or ledge. The front truck of the board is grinding on the barrier as the rider approaches it, ollies onto it, and then flips the board 90 degrees. After sliding along the obstacle while maintaining balance on the front truck, the rider ollies off at the conclusion.
In conclusion, skateboard grinds are a core component of the sport, and each kind of grind demands a particular technique and level of expertise. While the Smith grind, Bs bluntslide, and crooked grind are more complex and difficult, the 50/50 grind is simple to learn. Whether you’re a novice or an expert skateboarder, mastering these grinds can elevate your abilities and dazzle onlookers and friends.